Problem Description:Power switch does not light up.
Reason Analysis:
1)Reason Analysis
2)Check if the power switch is bad.
Solutions:
1)Check the external power lines, to confirm that the external power is normal, and do not plug the power cord, then open the power switch fuse box to confirm whether the fuse is blown, if broken then replace the fuse.
2)Replace the power switch
Steps to replace the power switch：
Step 1: Turn the treadmill sideways, remove the screws under the motor cover, and then turn the treadmill back over.
Step 2: Remove the motor cover, unplug the two AC lines connected to the controller behind the power switch， and unscrew the ground screw fixed to the main frame.
Step 3: unscrew the screws securing the right side of the motor cover, removing the right cover, unscrew the two small screws securing the power switch, and unplug the three AC cables behind the switch.
Step 4: Find the new power switch, insert the three AC lines (fire line, zero line, ground line), fix the power switch on the right side of the motor cover, and then tighten the two screws on the right side of the motor cover
Step 5: Tighten the yellow ground screw fixed on the main frame, and then plug the two AC wires on the controller. Finally, fix the communication line and AC line with a tie.
Step 6: Cover the motor cover, turn the treadmill over and lock the four screws fixing the motor cover, then turn the treadmill back.